For Bending and Forming Plastics (Patent US 11633901)
Exclusively designed to give constant professional bends while working with all types of thermoplastic materials
Acrylic • Polycarbonate • PETG • ABS • Styrene • PVC • and More!
The 56000 models are re-designed from the ground up and include some great new features. These new features include the all NEW QTC44 controller, a Unistrut Rail System with 56″ x 48″ working area, quick release Cam Clamp Tray Locks, Material Support with Stops, Integrated Frame Stops and a NEW Leg Kit. With faster set-up and more adjustability, the 56000 models will REDUCE FABRICATION TIMES.
56000 MODELS INCLUDE:
- 4 Heating Trays
- QTC Controller with Mounting Tray
- Powder Coated Aluminum Frame
- 16 Gauge Powder Coated Steel Legs
- Material Support Bar
- 4 Stop Plates
| Models | Description | Price | Buy |
|---|---|---|---|
| 56250 | 1/4" Thermoplastic Heating Table | $2999.00 | |
| 56375 | 3/8" Thermoplastic Heating Table | $2849.00 | |
| 56500 | 1/2" Thermoplastic Heating Table | $2849.00 |
- 120 Volt AC / 60HZ
- 800° Operating Temperature
- 62 1/4" Wide x 57 1/2" Deep x 36" High (Overall)
- 48" Wide x 56" Deep (Working Area)
- 86 lbs. Approximate Assembled Weight
- Micro Processor Controlled
- Built in 3 Function Timer
- Ultra High-Temperature Insulation
- Sealed & PTFE coated working area
- Heating Trays have a 1 3/4" center to center measurement when put side by side.
- Powder coated finish.
Download manual:
| ELECTRICAL INFORMATION | |
|---|---|
| Controller | Micro Processor |
| Maximum Load | 1800 watts / 15 Amp |
| Input Voltage / Hz | 120v AC / 60 Hz |
| Current Control Range | 0 to 100% |
| Fuse | BK/MDA-15-R |
| DIMENSION & WEIGHT | |
|---|---|
| Overall | 62" wide x 58" deep x 34" high |
| Working Area | 48" wide x 56" deep |
| Assembled Weight | 86 lbs. |
| TRAY HEATED AREA | |
|---|---|
| 56250 | 1/4" - 48" |
| 56375 | 3/8" - 48" |
| 56500 | 1/2" - 48" |
| MATERIAL THICKNESS GUIDE: | |
|---|---|
| 56250 | .040" - .080" (1mm - 2mm) |
| 56375 | .080" - .156" (2mm - 4mm) |
| 56500 | .125" - .500" (3mm - 12mm) |
56000 Series Accessories List
| Add a Tray | |||
|---|---|---|---|
| Part No. | Description | Price | |
| TT250 | 1/4" with Nema 5-15P, Standard US 120V plug | $399.00 | |
| TT375 | 3/8" with Nema 5-15P, Standard US 120V plug | $349.00 | |
| TT500 | 1/2" with Nema 5-15P, Standard US 120V plug | $349.00 | |
| Replace a Tray | |||
| Part No. | Description | Price | |
| TT250M | 1/4" with 3 Pin Molex Plug 120V for QTC44 Controller | $399.00 | |
| TT375M | 3/8" with 3 Pin Molex Plug 120V for QTC44 Controller | $349.00 | |
| TT500M | 1/2" with 3 Pin Molex Plug 120V for QTC44 Controller | $349.00 | |
| Supports & Stops | |||
| Part No. | Description | Price | |
| SS56 | Material Support with 2 Stops & Hardware | $160.00 | |
| SP24 | 2 Stops Plates with hardware | $35.00 | |
| Controller | |||
| Part No. | Description | Price | |
| QTC44 | Digital Controller (4 Tray) use with TT250M, TT375M & TT500M Trays | $457.00 | |
This System prepares thermoplastic materials for forming all-angle bends, REDUCES FABRICATION TIME both in setup and multiple bend operations. Unit has independently operated and movable heating trays, index rules on either side of table, full usage of working area allows you to work from both sides of the table at the same time. The adjustable fence may be positioned as shown or between trays. Units are completely self-contained and requires NO SPECIAL WIRING. (120 volt 15 amps)